Publicidad
Idiomas disponibles
Idiomas disponibles
Settings
Control Lock
The oven features a Control Lock mode. When enabled, the oven will ignore any user input and the oven cannot be operated.
To enable Control Lock mode:
•
Press the Settings button and use the Temp/Time knob to select "CONTROL LOCK".
•
Rotate the Temp/Time knob to toggle the Control Lock status (On/Off).
•
Press the Temp/Time knob to confirm the desired setting.
When enabled, a lock icon will appear on the control display. If a button is pressed or a knob is turned when Control Lock is
enabled, the oven will beep and the lock icon will flash.
To disable Control Lock mode, simply follow the same steps as above.
Preheat
By default, some of the cooking modes for the oven have a built-in preheating mode. If desired, preheating may be disabled
for all cooking modes.
To toggle preheating on or off:
•
Press the Settings button and use the Temp/Time knob to select "PREHEAT".
•
Rotate the Temp/Time knob to toggle the Preheat setting (On/Off).
•
Press the Temp/Time knob to confirm the desired setting.
NOTE: If Preheat is enabled, the preheating mode may be skipped manually by pressing the Start button once to start
the cooking mode and pressing the Start button a second time to skip preheat. The cooking timer will immediately begin
counting down.
Brightness
The brightness of the control display may be adjusted. By default, the display brightness is set to the maximum level.
To adjust the brightness setting:
•
Press the Settings button and use the Temp/Time knob to select "BRIGHTNESS".
•
Rotate the Temp/Time knob to increase or decrease the brightness to the desired level.
•
Press the Temp/Time knob to confirm the desired setting.
17
Publicidad
