Publicidad
Idiomas disponibles
Idiomas disponibles
In & Out Detachable Solar Wall Light
Installation B: Split Wall Mount
The light head can be removed according to the arrows on the side of the light
for split installation.
The connection cable is 9 ft (3m) long, please confirm the installation position of
the solar panel and the light before installation.
1. Mount solar panel according to Installation A
2. Drill 2 holes (ø 6mm, depth 50mm) with a spacing of 120mm. Light head
can be mounted horizontally or vertically.
3. Insert the expansion plugs in the holes, thread the screws into the expansion
plugs, keeping the screws protruding 3–5mm.
4. Hang the light on the screws.
5. Connect the cable of solar panel to light.
The light head can also be mounted to a wall or flat surface with the provided
mounting tape or to a magnetic metal surface using the integrated magnets.
7
™
by Wagan Tech
www.wagan.com
®
Publicidad
