Publicidad
Idiomas disponibles
Idiomas disponibles
Operation & Indicators
Turn ON the laser tool:
• Method 1: Slide the ON/OFF Switch to the ON Position, the horizontal
line and self-leveling mode turned on by default.
• Method 2: When the ON/OFF Switch in OFF Position, short press
or
to turn the laser tool ON. The manual mode is enabled by
default.
Turn OFF the laser tool:
If the laser tool is in self-leveling mode: Slide the ON/OFF Switch to
the OFF Position to turn laser tool OFF.
If the laser tool is in manual mode:
• Method 1: Slide the ON/OFF Switch to the ON Position, and then slide
it again to the OFF Position to turn laser tool OFF.
• Method 2: Short press
and
until all laser beams OFF.
※Note:
• Under self-leveling mode, even if all laser lines are turned off, the
laser tool is still powered ON.
• Please note power indicator (14), the laser tool is OFF when the
indicator lights off.
Lines switching:
• Short press
and
repeatedly to switch the composition of
different laser lines.
Indicators:
• When the device is turned on, the power indicator (14) lights up.
• When the battery is low, the power indicator (14) will blink.
• When the vertical line is turned on, the vertical line indicator (11) will
light up.
• When the horizontal line is turned on, the horizontal line indicator (13)
will light up.
-5-
Publicidad
