Descargar Imprimir esta página

Ingco ING-CB1601 Manual Del Usuario página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

The cathode of battery charger not connected to the
chassis of vehicle has to be connected first. The anode is to
be corrected to that of the battery. And then connected to
the main supply.After charging, disconnect the battery
charger from supply mains. Then remove the chassis and
andote connection in this order.
Motor vehicle manufacturers recommend disconnecting
the battery from electric system of the vehicle before
charging.
Voltage peak may cause damage to electronic
components. It is advisable therefore to disconnect the
battery from the system when charging.
WARNNING: explosive gases/prevent flames and
spark/provide adequate ventilation during charging.
7|English

Publicidad

loading

Este manual también es adecuado para:

Ing-ucb1601Ing-cb1601mIng-cb1601s