Publicidad
Select the appropriate mounting hardware
To accommodate different TV designs, the FLATPNLWALL comes with three sets of
screws of different lengths and diameters, and two sizes of spacers.
To select the combination of mounting hardware that you need to use to attach the
brackets to the TV, complete the following:
• Determine whether the back of the TV is flush or inset.
• Determine the depth of the mounting holes on the TV.
• Determine the diameter of the mounting holes on the TV.
• Consult the images below to see the different hardware combinations available, and
select the one that works best with your TV.
Note: If you're using a TV with a flush mounting surface, you don't need to use any of
the provided spacers.
The following screw sizes work with a flush mounting surface:
M5x14 mm
M6x14 mm
The following hardware combinations work with an inset mounting surface:
M6x30 mm
M8x30 mm
or
or
or
continued on next page
Instruction manual
7
Publicidad
