MO-EL 9100 Uso Y Mantenimiento página 11

PRELIMINARY OPERATIONS
-Remove the appliance from its packaging.
-Check that all the contents are present in the box: instruction manual,
warranty, and the appliance itself.
- Place the product in the desired position.
-Open the back hatch and pour in clean water. The water level must
always be between the two lines, MIN and MAX. (Fig.1-2-4)
-Alternatively, attach the tank to a tap via a length of hose to allow for
automatic filling. (Fig.3)
-Plug the appliance into a power socket.
-Turn the SPEED knob to the corresponding "LOW", "MID" or
"HIGH" level.
-After turning on the power, turn the "COOLING" knob to the ON po-
sition to activate the cooling / humidification function. By leaving the
knob in the OFF position, the product will function as a fan.
-Turn the SWING knob to the " " position, and the vertical blades of
the machine will automatically swing left and right. When the swing
knob is turned to the " ", position, the horizontal blades will automati-
cally swing up and down. When the swing knob is turned to " ",
position, the horizontal and vertical blades will automatically swing up
and down, left and right.
POSITIONING THE APPLIANCE
The ideal position for the product is in front of an open door or window
in order to facilitate air recirculation.
Ensure the appliance is placed on a flat surface.
The product can also be used as a humidifier for overly dry envi-
ronments. In this case, the windows should be kept closed.
Outdoor use is not recommended as the product is not certified
against rain or water jets.
Empty the tank before moving the appliance to avoid problems
caused by excessive weight.
11