Jocel JT47L400192 Manual De Instrucciones página 33

PIPELINES CONNECTION
1. The dimension of each pipe part is G1/2"; The massive pressure of inlet should use Pa as the
unit; The minimum pressure of inlet should use Pa as the unit.
2. Connection of pressure relief valve with the heater on the inlet of the water heater.
3. In order to avoid leakage when connecting the pipelines, the rubber seal gaskets provided with
the heater must be added at the end of the threads to ensure leak proof joints (see Fig.4).
4. If the users want to realize a multi-way supply system, refer to the method shown in fig.5 and
fig.6 for connection of the pipelines.
33