Stealth Products UniLink Manual De Usuario página 7

Operating Laterals
To operate the laterals:
1. Depress the Quick Release button (A)
2. The lateral will swing free through 134° on
either side of the initial locked position.
3. The lateral will only lock in place when
returned to its initial position.
Adjusting Adductors
Standard laterals offer three points of adjustment:
To adjust links (B):
1. Slightly loosen the M5 x 0.8 x
25mm Socket Head Screws (B).
2. Set desired angles and tighten
screws with a 4mm Hex
Wrench.
To adjust pad position:
1. Slightly loosen the two M5 x
0.8 x 10mm Socket Head
Screws (C) and slide the pad to
the desired position.
2. Tighten screws to secure the
pad in the new position. Do
not over-tighten.
EN
Design and Function
A
C
134°
B
2