Descargar Imprimir esta página

Kyutec KT1053 Guia De Inicio Rapido página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Operating the unit
IV. How to use the device
1. Test the function of the device before use. Switch on the power and then adjust the
intensity to level 1. Check if the LED indicator (green light) is blinking.
2. Press the test button three times in a row. The device will release a weak electrical
impulse that lasts about 5 seconds. Now, you can adjust the intensity to the level
you feel comfortable with.
3. Due to different skin sensitivity, you might not feel the electrical impulse. In this
case, press the test button 3 times in a row, and adjust the intensity to the level
you need. The nerves are stimulated at nighttime easier. Therefore we advise, that
you reduce the intensity for the night for 1~2 levels to have the best effect.
4. Meaning of the LED light:
When you wear the Kyutec Snore Stopper on your wrist, the LED normally changes
from "red" to "green", which means the device has contact to your skin properly
and you can start using it.
If the LED still shows red light, the device has no proper contact to your skin.
Therefore, you should adjust the wrist belt into a position until you see that the
20
LED indicator shows green light. If the device still does not work, please look at the
MAINTENANCE & TROUBLESHOOTING section on page 22.
EN
Operating the unit
5. Our device is patented intelligent mechanism can detect snores above 65 dB
automatically, but without other background noise. By now, you can stop the
annoying snores and let you and your family expect a better sleeping quality in
the future!
I
V. After Use
1. After use, please see the following instructions to prevent damage of the self-
adhesive electrode pads: Unhook the wrist-belt and detach the device from
your wrist gently (as shown in picture I). After you took off the device, please
stick the big plastic film back onto the electrode pads (as shown in picture II).
This can prevent the pads of contamination with dusty particles and will en-
hance their lifespan. This device will automatically switch off after 8 hours. In
order to enhance the battery's life, please switch power off after you wake up.
II
21
EN

Publicidad

loading

Productos relacionados para Kyutec KT1053