Preparing for use
Preparing for sterilizing
Before you put the items to be sterilized in the sterilizer, clean them thoroughly in the
dishwasher or clean them by hand with hot water and liquid dishwashing detergent�
Assembling the sterilizer
There are several ways to assemble the sterilizer�
1
With only the small basket on the base to sterilize small
items such as soothers.
2
With only the large basket on the base to sterilize
medium-sized items such as breast pump parts, toddler
plates or toddler cutlery.
3
With the large basket and the small basket on the base to
sterilize up to six 330 ml/ 11 oz bottles. Place the bottles
upside down in the large basket and place the bottle
dome caps, screw rings and nipples in the small basket.
Note: When you fill the small basket, put screw rings on the
bottom, place the nipples and the bottle caps loosely on top
of the screw rings.
Note: Make sure all parts that need to be sterilized are
completely disassembled and place them in the basket with
their openings pointing down to prevent them from filling
up with water.
- English 10 -