Baby Relax DL8101-5 Manual De Instrucciones página 5

A
8
ATTENTION:
The TODDLER RAIL is designed for use with the 3-IN-1 CRIB - DL8101B3, sold separately.
The above illustrations are for reference only.
STEP 1: Detach the front panel (B) from the side panels (A) with Allen key (5).
STEP 2: If the mattress support (D) is not in the lowest position, unscrew the mattress support
bolts from the side panels and move mattress support to the lowest position.
STEP 3: Secure toddler bed guardrail (E) to side panels (A) and bottom rail (C) with bolts (1 & 4), spring
washers (2), wood dowel (3) and Allen key (5).
STEP 4: Ensure all bolts are tightly secured.
STEP 1: Follow steps 1 to 3 of the crib assembly instructions.
STEP 2: Follow steps 3 to 4 for the toddler bed assembly instruction located above (starting from crib).
A
E
C
E
1
2
TODDLER BED ASSEMBLY: STARTING FROM CRIB
TODDLER BED ASSEMBLY: STARTING FROM SCRATCH
TODDLER RAIL
DL8101-5
3