Dolmar UV3200 Manual De Instrucciones Original página 11

– Check the grass catcher
regularly for any damage or
worn
– Check all the nuts, bolts and
screws are tight
– Replace or repair by our
authorized service center if
there are any damaged or
worn parts.
• Do not carry out maintenance
or repair work other than that
described in this instruction
manual. Any other work must be
carried out by Makita authorized
service center.
• Only use
replacement
accessories intended for your
machine. Otherwise it may result
in personal injury or damage on
the machine.
• Store the machine in a dry room.
Keep it out of reach of children.
Never store
outdoors.
Vibration
• People with poor circulation who are exposed to
excessive vibration may experience injury to blood
vessels or the nervous system. Vibration may cause
the following symptoms to occur in the fingers, hands
or wrists: "Falling asleep" (numbness), tingling, pain,
stabbing sensation, alteration of skin color or of the
skin. If any of these symptoms occur, see a physician.
• To reduce the risk of "white finger disease", keep your
hands warm during operation and well maintain the
equipment and accessories.
original Makita
parts and
the machine
WARNING:
• This machine
electromagnetic
operation. It is recommended that
persons with medical implants
should consult their doctors and
implant manufacturers before
using this machine. Otherwise
the electromagnetic field may
affect medical implants and it
may result in serious injury.
ASSEMBLY
CAUTION:
• Always be sure that the machine
is switched off and unplugged
before carrying out any work on
the tool.
Assembling the handle bar (Fig. 2, 3, 4)
1) Insert the lower handle bar (6) into the support (7).
Align the screw holes on them, and then fasten them
by a screw. Perform this step on both sides.
2) Place the middle handle bar (5) onto the lower handle
bar (6). Align the screw holes of those handles, and
then fasten them with the knob (4), spacer, and the
bolt. Perform this step on both sides.
3) Place the upper handle bar (3) onto the middle handle
bar (5). Fasten each side of the upper bar with the
knob (4), spacer, and the bolt.
4) Fasten the cord with the clips (12) onto the handle bar.
Assembling the grass catcher
CAUTION:
• Do not operate the machine
without grass catcher. Otherwise
ejected object may cause injury.
• For rear discharge appliances
with exposed rear rollers, when
used without a catcher, full eye
protection shall be worn.
NOTE:
• The performance of the machine reduces when the
grass catcher is full. Empty the grass catcher on regular
basis before it becomes completely full.
produces an
field during
11