Beamz MHL90 Manual De Instrucciones página 8

HOW TO CONTROL THE UNIT
Press the MENU button, to choose a function. Press ENTER button to enter the chosen function, then press UP/DOWN button
to choose the function, press ENTER button again to confirm.
Main Function as follows:
A. Auto/sound mode
B. DMX mode
C. Master/slave mode
A. AUTO/SOUND MODE
Auto/Sound Control Mode
Choose Auto/Sound control mode to let the unit function Stand-alone
Auto mode
 Choose
 Press UP/DOWN button to choose
 After desired show is chosen, press ENTER button confirm
 Unit will run selected show after a few seconds
Sound mode
 Choose option
 Press UP/DOWN button to choose
 Press Enter button to confirm
When sound is set off, Auto mode will run automatically
B. DMX MODE
If controlled by an DMX controller, then you need to set the start-address code to control the light, the start-address code
value can be set between 1 and 512.
Start address
 Choose option
 Use UP and DOWN keys to select the desired start-address.
 After address is chosen, press ENTER button to confirm
Channel Mode
The unit can be controlled with 11 or 15 channels DMX
 Choose option
 Use UP and DOWN keys to select the desired channel mode
 After channel mode, press ENTER button to confirm
8
(Showmode), press ENTER button to confirm
(Show 1) till
(Sound), press ENTER button to confirm
or
(Address) in MENU, press ENTER button, address will now strobe.
(Channel Mode) in MENU, press ENTER button, selected mode will now strobe
Item Sq No. Display
①
MENU
②
DOWN
Button:
③
④
ENTER
⑤
⑥
LED
⑦
⑧
(Show 4)
(11 channel) or
Function
Enter the menu
Previous option
UP Next option
Conform the selection
function
- DMX signal
- Auto mode
DMX signalinput
- -
- Audio signal
Master mode
(15 channel)