Publicidad
STEP 11
WITH THE HELP OF ANOTHER PERSON, TURN UNIT OVER
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
Position the back panel as shown. Flush the bottom edge of the back panel with the bottom edge
of the bottom (D). Align squarely and nail (12) straight into back edges as shown.
Assure that the unit is
square. Distance from
corner to corner are equal.
Raw edge
Flush edge of back panel
with edge of bottom.
ameriwoodhome.com
12
Q
D
17
12
(x36)
#A21110
Notch in back panel
positioned here.
A
Publicidad
