Publicidad
Idiomas disponibles
Idiomas disponibles
1. Make sure that the installation site will not allow the rotating fan blades to come into contact
with any object and that there is a minimum clearance of 150mm(6") from the blade tip the wall
or ceiling. Please note that the bigger this clearance is the better the airflow from your fan will
be.
Do NOT use outdoors. Installing the fan is a position where it could be exposed to water or
moisture is dangerous.
If the location you have chosen does not have a suitable support beam capable of supporting
45kg, install a brace 2"x 4" between the ceiling joists as a support medium.
Secure the hanging bracket the ceiling joist or suitable structure that is capable of carrying a load
of at least 45kg, with the two long fixing screws provided. Ensure that at least 30mm of the screw
is threaded into the support.
2. Place the assembled fan into the bracket and make the wiring connection.
3. Place the canopy over the bracket, align the canopy holes with the screws and tighten.
Publicidad
