Perel VTBAL402 Manual Del Usuario página 5

6. Operation
6.1 General Operation
1.
2.
3.
4.
5.
6.2 Unit Conversion
Press the unit button until the desired weighing unit is displayed.
6.3 Piece Counting
1.
2.
3.
6.4 Calibration
1.
2.
3.
4.
V. 04 – 25/10/2019
VTBAL402
Place the scale on a solid, level and non-slippery surface.
Switch on the scale. The scale is ready-to-use when the
display shows 0.
Place the item to be weighed or the tare item in the middle
of the weighing platform.
To tare an item, tap the tare button. Place the item to be
weighed on the scale.
The weight is displayed.
Hold the piece-counting button pressed.
Press the unit button until the display shows the sample
amount (25, 50, 60, 75 or 100). Place the same amount of
items in the middle of the weighing platform. Press the
piece-counting button to confirm.
To count the amount of pieces, press the piece-counting
button, place the items in the middle of the weighing
platform and read the results from the display.
Hold the unit button pressed until the scale enters the
calibration mode.
Briefly press the unit button. The required weight appears
on the display.
Place the required weight in the middle of the weighing
platform.
The scale will calibrate automatically and return to the
normal weighing mode.
5 ©Velleman nv