Publicidad
Idiomas disponibles
Idiomas disponibles
f To select reverse rotation, push the Forward/Reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f For drilling in masonry, set the drilling mode selector
(4) to the
position.
f For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Switching on and off
f To switch the tool on, press switch (1). For variable
speed units, the tool's speed depends on how far
you press the switch. As a general rule for variable
speed units, use low speeds for large diameter drill
bits and high speeds for smaller diameter drill bits.
f For continuous operation, press the lock-on button
(2) and release the variable speed switch. This option
is available only at full speed. This option does not
work in reverse rotation.
f To switch the tool off, release the switch. To switch the
tool off when in continuous operation, press the variable
speed switch once more and release it.
MAINTENANCE
Your tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning! Before performing any maintenance, switch
off and unplug the tool.
f Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
f Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
The performance of your tool depends on the accessory
used. BLACK+DECKER accessories are engineered
to high quality standards and designed to enhance the
performance of your tool. By using these accessories you
will get the very best from your tool.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or if it is of
no further use to you, do not dispose of it with household
waste. Make this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and
authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and if you
need technical advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location nearest you, or
visit us at www.BlackandDecker-la.com
SPECIFICATIONS
Power
Voltaje
AR, B2C
B3
B2
BR
Chuck
No-load speed
IPM - Blows per minute
Max drilling capacity
Steel/concrete
Wood
Weight
SPECIFICATIONS
Power
Voltaje
AR, B2C
B3
B2
BR
Chuck
No-load speed
IPM - Blows per minute
Max drilling capacity
Steel/concrete
Wood
Weight
ENGLISH • 13
TP550
550W
220V ~ 50Hz
120V ~ 60Hz
220V ~ 50-60Hz
127V ~ 60Hz
3/8" (10mm)
2800/min (rpm)
47600 ipm (gpm)
3/8" (10mm)
25/32" (20mm)
1,9kg (4,2lb)
TP555
550W
220V ~ 50Hz
120V ~ 60Hz
220V ~ 50-60Hz
127V ~ 60Hz
3/8" (10mm)
0 - 2800/min (rpm)
0 - 47600 ipm (gpm)
3/8" (10mm)
25/32" (20mm)
1,9kg (4,2lb)
Publicidad
