Perel VTBAL600 Manual Del Usuario página 5

6. Operation
6.1 General Operation
1.
2.
3.
4.
5.
6.2 Unit Conversion
Press the unit button until the desired weighing unit is displayed.
6.3 Hold Function
Press the hold button repeatedly to select the desired hold
function:
6.4 Calibration
1.
2.
3.
V. 02 – 20/03/2019
Hold the scale in your hand or hang it on a solid truss.
Switch on the scale. The scale is ready-to-use when the
display shows 0.
Hang the item to be weighed on the hook and wait for the
display to stabilize
To tare an item, tap the tare button. Place the item to be
weighed on the scale.
The weight is displayed.
A auto hold
P peak hold
N no hold
With the scale off, press and hold the unit and on-off
buttons simultaneously until a number appears in the
display.
Hold the on-off button pressed to reset the value to
100.0 kg.
Hang the required calibration weight on the hook. Wait for
the value to stabilize and press the on-off button.
Calibration is complete when PASS appears on the display.
VTBAL600
The weight is locked when stabilized.
The highest weight is locked. Good for
measuring forces.
The weight does not lock.
5 ©Velleman nv