Stihl ADVANCE Vent Manual De Instrucciones página 10

Criteria for discarding
► Examine the hard hat at regular
intervals for visible faults (e.g.
cracking, discoloration). A hard
hat that is altered or damaged
must be replaced immediately.
► After stress such as a severe
impact the hard hat must be
replaced even if the damage is
not externally visible.
Service life
The hard hat should not be used for
more than four years from the date
of manufacture printed on it (see
date dial in the shell of the hat) and
it should not be used for more than
3,500 hours from the date of first
use.
► It is essential to replace the hard
hat at the right time.
The hard hat starts to age from the
day of first use. Please note the
label with the "Issue date" informa‐
tion.
► Mark the date of first use on the
label inside the hard hat with a
permanent marker.
Accessories and spare parts
Hard hat with interior and sweat‐
–
band: 0000 889 9006
Interior: 0000 889 9008
–
Sweatband: 0000 889 9007
–
Chin strap: 0000 889 8007
–
Rain curtain: 0000 889 8006
–
10
► Always use original STIHL parts.
Certification
The hard hat complies with the
–
following Standard:
EN 397:2012
EC conformity mark: CE
–
Manufacturer/distributor: STIHL
–
Specifications
Model: ADVANCE Vent, ADV‐
–
ANCE X-Vent
Adjustable head size: 53 cm to
–
64 cm
Shell material: ABS (acrylonit‐
–
rile-butadiene-styrene)
Headband material: HDPE (high
–
density polyethylene)
Suitable for low temperatures
–
down to - 20 °C.
1
1 Month dial
The month dial indicates the
month of manufacture.
2 Year dial
The year dial indicates the
year of manufacture.
Adjusting the hard hat
► Put on the hard hat.
0456-704-0008.VA2.B19.
2