Metra 95-7631B Instrucciones De Instalación página 2

1. Remove the (2) Phillips screws
securing the knee bolster panel
below the steering column, and
then unclip the panel. It is not
necessary to completely remove
the panel. (Figure A)
2. Unclip and remove the passenger
door sill and kick panel. (Figure B)
3. Remove the (5) T-20 Torx screws
securing the glove box and then
remove. There are (2) screws
below the glove box, and (3)
screws exposed when you open
the glove box. (Figures C and D)
Continued on next page
Dash Disassembly
(Figure A)
(Figure B)
95-7631B
Upper screws
(Figure C)
2
Lower screws
(Figure D)