Hisense Cross Duo Manual De Instrucciones página 25

For easier transport, some appliance parts are packed separately and safely placed in the main packaging
unit.
Before first use, read and observe the instructions for assembly and safe use.
Due to its design, the appliance is not free-standing. Therefore, we recommend safe placement on the
charging station. The appliance is intended for household use, for dry vacuum cleaning with an option for
wet mopping of the floor.
Appliance parts
1 Housing with motor unit, battery,
and dust bin
4 2 × Wet floor cleaning mop
Appliance assembly
Using and operating the appliance
The appliance can be used as an upright vacuum cleaner that also allows wet mopping of the floor. The two
functions can also be used separately. When you are only vacuum cleaning and not using the mopping
function, we recommend removing the mopping pad from the bottom of the brush,
2 Handle
5 Dispenser tray
Assemble the appliance handle and the motor unit. The appliance is
correctly assembled with the appliance is firmly attached all the way
to the grooves.
When the appliance is stored or during charging, it should be kept at
least 1 m away from the closest heat source. Due to its design, the
appliance is not free-standing.
To open the clean water tank, proceed as displayed in the figure. Fill
the water tank with tap water (room temperature) up to the max.
marking indicating the maximum allowed amount. Do not exceed the
max. marking to prevent spilling. Close the lid.
25
3 Adapter with power cord
6 Extra filter