Publicidad
Idiomas disponibles
Idiomas disponibles
Before Installing
Peripherals
Turn Off the Notebook
Turn off the Notebook and unplug the AC power cord
from AC outlet before the installation. Otherwise, it
may
damage
the
notebook
and
the
peripheral.
While the Notebook is powered on, the
following devices is able to remove from
the Notebook.
*USB Compatible Devices
Tip
*Memory Stick
*Memory Stick Pro
*SD Card
*MMC
Turn off the Notebook. (
Page12)
1
Disconnect the DC plug of the adapter from
2
your Notebook.
Avoid to cut your hand during device
removal or installation, we suggest
you to wear gloves.
Attention
36
qbex aero style / User's guide
Installation Notice
Please Remove the Static Electricity of Your Body
Because the parts such as memory and circuit board is
extremely weak to the static electricity. It is possible to
damage the parts when your hands touch them. Please
touch the metal object such as knob of the door to remove
the static electricity which has been electrified in the body
before the peripheral installation
Please Read the User's Guide
If you install or remove the pheripherals in a wrong way,
it is possible to damage the peripheral. Please read this
manual well before doing the installation.
Please Read the Manual of the Peripheral Device
The manual and driver CD always come with the peripheral,
please read through the manual before the driver installation.
About Plug and Play
Plug and Play is a capability developed by Microsoft for
Windows operating systems that gives users the ability
to plug a device into a computer and have the computer
recognize that the device is there. It is necessary for the
device driver of the peripheral device to be prepared well
on Windows side.
When the driver is not prepared, using the wizard function
of Windows, it installs device driver to Windows.
When using the peripheral device, the
software which controls the peripheral
device which is called "device driver" is
necessary.
Tip
The driver is offered with the CD-ROM
or similar one, and it is
possible to download it from the
manufacturer website.
After installing the peripheral device, turns its
1
power ON.
In the task bar under the desktop, "Found New
Hardware" message pops up.
Sometimes,"Found New
Hardware - USB Mass Storage
Device" message appears, rather
Notice
than automatically loading the USB
driver.
qbex aero style / User's guide
When Device Driver Is Not Built In Windows
When the device driver is not built in Windows, the
specific driver has to be installed.
After installing the peripheral device, turns its
1
power ON.
"Found New Hardware Wizard"dialog box
appears.
Click [Next].
2
Follow the instructions of the wizard for the
3
operation. When the "Installation finished"
message appears, the setting is done.
4
Click [Finish].
In case, you have to set
the resources such as
IRQs for driver installation.
Please inquiry the device
Notice
manufacturer for the
detail information if
necessary.
37
Publicidad
