Mx Onda MX-PG2200 Manual De Usuario E Instalacion página 35

c) If you are going to make a prolonged and continuous use of the gas plate,
we recommend that you increase the ventilation system of the room where
the gas plate is installed.
Location of the gas hob
The gas plate is designed to withstand high temperatures, so it can be installed
above the oven, (leaving a small gap to facilitate proper ventilation of the oven).
For proper installation and ventilation the minimum distances between the gas
plate and the different furniture and / or appliances must be respected, follow
the following recommendations:
a) The hob can be installed in any room, as
long as it has sufficient ventilation and
does not have excess humidity.
b) It is necessary to leave a lateral
separation of at least 150 mm between
the plate and the nearest piece of
furniture or household appliance
c) The height from the gas hob to the
furniture must have a minimum of 400
mm in height.
d) The height from the gas hob to the hood
must have a minimum height of 700
mm.
e) At the back of the gas hob, a gap
between the plate and the wall of at
least 60 mm must be left to facilitate
connection and manipulation of the gas
inlet of the plate.
f) Along with the packaging of the gas hob there is a cardboard template for
cutting the countertop, this template has the dimensions and shape of the
bottom of the gas hob, use it to mark on the countertop the lines for cutting
or draft of it.
Recommended minimum measures
for the installation of the gas hob
9
.