Mx Onda MX-PG2200 Manual De Usuario E Instalacion página 36

g) Before attaching the gas hob, you must glue the sealing gasket (supplied)
to the bottom of the gas hob.
h) The fixing accessories (hooks and screws supplied) are used to fix the gas
hob on a countertop from 20 to 40 mm thick, the following illustration shows
the three different options.
Countertop 20 mm thick
i) In the case of installing an oven to fit under the gas plate, it is
recommended to improve the ventilation around the oven, to avoid
excessive heating, place a grid for the air intake from the bottom of the
oven and another grid in the oven. upper part of the hob (Fig. 5) or in the
front-upper part of the oven (Fig. 6).
Fig. 5
Connection of gas supply by rigid or flexible tube
¡Very important!
The connection of the gas outlet for both rigid and flexible pipes must be
carried out by an authorized installer.
The gas plate comes from the natural gas injectors (G20), in the case of
using butane gas (G30) the injectors (supplied) suitable for butane gas
(LPG) must be changed.
Make sure that the pressure of the gas supply is within the values
specified in table 3.
Countertop 30 mm thick
Fig. 6
10
Countertop 40 mm thick