Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Connection and Use
We recommend that you charge your electric wine
opener for at least eight hours before using it for the first
time. Please follow the instructions for recharging below:
Recharging your Electric Wine Opener
Plug one end of the adapter cord into the base of the
recharging unit and the other end into a main socket.
Place the Electric Wine Opener into recharging unit
ensuring that it is firmly in position and that it is fully
engaged with the recharging connection. It will take
approximately 6-8 hours to recharge your electric
wine opener. The Charging LED light will illuminate
when unit is charging.
To Operate Your Electric
Wine Opener
The Electric Wine Opener is
operated by one single switch
The switch has two functions.
Press the lower part of the
switch to remove a cork from
a bottle. Press the upper part
of the switch to release a cork
from the mechanism after you
have removed from the bottle.
(Figure 1)
6
www.oster.com
FPSTBW8225_FPSTBW822T_FPSTBW822P_14ESM1.indd 6-7
Up
Down
Figure 1
Before removing the cork you
must remove any foil from
the bottle using the foil cutter
provided. (Figure 2)
1 Place the Electric Wine
Opener on top of the
wine bottle making sure
that it remains as upright
as possible at all times. If
you hold the Electric Wine
Opener at an angle to the
bottle it will not remove the
cork properly. (Figure 3)
2 Hold the Electric Wine
Opener firmly and depress
the lower part of the switch.
The corkscrew spiral will
turn in a clockwise direction
and enter the cork, then
gradually remove it from
the bottle. When the Electric
Wine Opener mechanism
has stopped the cork has
been fully removed from
the bottle.
www.oster.com
Figure 2
Figure 3
7
21/08/14 11:48 AM
Publicidad
