LG HBM-770 Manual Del Usuario página 5

How to use
Calling
Answering a call
- When there is an incoming call, the Headset will ring.
- Briefly press the CALL button to answer an incoming call.
Making a call
- If you make a call from the handset, the call will (subject to phone settings)
automatically transfer to the Headset. If the call is not automatically
transferred, you can manually transfer the call by briefly pressing the
CALL button on the HBM - 770 (handset and headset must be paired).
Voice dialing*
- Briefly press the CALL button to activate "Voice Command Dialing".
You will get the best results if you record the voice dialing tag
through your Headset.
NOTE: If the handset does not support Voice Dialing, the headset
will activate Last Number redial.
Last number redial*
- Press and hold the CALL button for 1 second to activate "Last Number
Redial". The headset will beep, and call the last number dialed.
Ending a call
- Briefly press the CALL button.
Transferring a call*
- While on a call on your handset, briefly press the CALL button to
transfer the audio to the Headset.(headset and handset must be paired).
- And to transfer a call from the Headset to Handset, press and hold
VOLUME UP button for 5seconds.
Call waiting*
- Answer a second call without hanging up the first call by pressing the
CALL button for 1 second. Press the CALL button for 1 second to
return to the original call.
- Briefly press the CALL button to terminate both calls at once.
Call Reject*
- Activate Call Reject by pressing the CALL button for 1 second
when the handset rings.
* It is possible to use these functions only when your handset
supports them. For further information about using these features,
please consult your handset's user manual.
8
Summary of button functions
HBM-770
Function
Status
Power on Power off
Power off Power on
Volume up Talking
Volume down Talking
Transferring a call Talking
Answering a call Ringing
Ending a call Talking
Call waiting Talking
Last number redialing Idle
Voice dialing Start & stop
voice command
(handset must support)
Pairing mode Power off
Call reject Ringing
HBM-770
Function
Status
Operating Power on
Power off
Pairing mode
Headset / handsfree
Profile connected
Call connected
Charging Charging
Charging complete
Action
Press the PWR button for 1 second.
Press the PWR button for at least
2 seconds.
Briefly press the Volume Up button.
Briefly press the Volume Down button.
- Handset to Headset
Briefly press the CALL button
(must be paired)
- Headset to Handset
Press and hold the VOLUME UP button
for 5 seconds.
Briefly press the CALL button.
Briefly press the CALL button.
Press the CALL button for 1 second.
Press the CALL button for 1 second.
Briefly press the CALL button.
Press the CALL button for 5 seconds.
Press the CALL button for 1 second.
LED indication
Action
The blue LED light flickers 4 times.
The blue LED light flickers 4 times
and then turns off.
The blue LED light stays on.
The blue LED light flickers
2 times every 5 seconds.
The blue LED light flickers
2 times every 5 seconds.
The blue LED is stays on.
LED is turned off.
9