Front Runner FATF005 Instrucciones De Montaje página 4

2 FIT AND SECURE
2.5
3 FIT AND SECURE
2.1
2.4
3.1
Refer to RRSTUNI when assembling your Slimline II Tray.
3.2
3.3
2.2
3.4
Centre the rack and tighten fully. Use M8 nut caps (Items 10) to finish off the nuts.
FATF005_REV_A00
4
Nut plate shown on the inner side of
the roof.
4MM
Make sure that the wind diflector is
installed before you proceed to the next
step.
Fit your roof rack to the foot rails with
items 7, 8 and 9.
4 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS