Publicidad
Idiomas disponibles
Idiomas disponibles
OVERVIEW
1.
Set Button (Only on the Transmitter)
2.
Charging port
3.
Led Indicator battery power
4.
Power switch
5.
Led indicator connection
OPERATION
Turn on the power of receiver and transmitter, the device will connect automatically, RF indicator LED will light up white when
there is a connection.
Changing the frequency
Turn on the transmitter, then briefly press the "SET" button to change the frequency, the receiver will be automatically adjusted.
Re-pairing method
1.
First turn on the receivers you want to transmit to.
2.
On the transmitter, press and hold the SET button and the ON/OFF button simultaneously until battery LED starts
flashing.
3.
The RF indicator LED will light up on the receivers to show a successful connection.
4.
Now the transmitter is connected to the device that is transmitting, and the receiver is connected to the device that is
receiving. (For example, an active speaker or mixing console)
5.
After one successful pairing, it will be automatically paired at future startups.
Power supply
The USB to Micro-USB cable is for charging. Use it to connect to a qualified power adapter.
Frequency
If you experience interference, you can select a different frequency,
This device has 10 frequencies to choose from.
3
Publicidad
