Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
SPECIFICATIONS
Model
Speaker
Output power RMS
Power taps 100 V
Impedance
Sensitivity SPL (1 W / 1 m)
Sound pressure SPL (60 W / 1 m)
Frequency range
Dimensions (mm)
Weight
Finish
Color
Mounting
Power selection
MOUNTING AND POWER SELECTION
• Cut out a 5 mm hole in the ceiling.
• Install a hook at about 10 mm of the hole.
• Use the three steel wires to secure the speaker into the ceiling
by using the hook.
• Pass the speaker wires through the ceiling hole and connect
them to the corresponding amplifier terminals.
ES-60W Version 1.0
WARNING:
60 W, 30 W, 20 W, 15 W, 10 W & 7.5 W
165 Ω, 330 Ω, 500 Ω, 670 Ω, 1k Ω & 1,3 k Ω
Pendant by three hooks
1/1
PENDANT SPEAKER
Installation by qualified personnel only.
Speakers must be wired in parallel and connected to the
correct line terminals of amplifier.
Ensure that all speakers have the same polarity with
respect to each other.
Do not select another tapings if the speaker is in use.
No naked flame sources, such as lighted candles,
should be placed on the apparatus
Unused connection wires should be isolated.
ES-60W
6" full range
60 W
102 dB
120 dB
100 ~ 13.000 Hz
Ø 385 x 302 mm
3,4 kg
High impact ABS
White
Connection wires
Color
Green
Blue
Brown
Yellow
Red
White
Black
ES-60W
.
Impedance
100 V
165 Ω
60 W
330 Ω
30 W
500 Ω
20 W
670 Ω
15 W
1 kΩ
10 W
1,3 kΩ
7,5 W
-
Common
Publicidad
