Publicidad
Idiomas disponibles
Idiomas disponibles
1. Make sure that the installation site will not allow the rotating fan blades to come into contact with
any object and that there is a minimum clearance of 150mm (6") from the blade tip to the wall or
ceiling. Please note that the bigger this clearance is the better the airflow from your fan will be.
DO NOT use outdoors. Installing the fan in a position where it could be exposed to water or moisture
is dangerous.
If the location you have chosen does not have a suitable support beam capable of supporting 45Kg,
install a brace 2" x 4" between the ceiling joists as a support medium.
Secure the hanging bracket to the ceiling joist or suitable structure that is capable of carrying a load of
at least 45Kg, with the two long fixing screws provided. Ensure that at least 30mm of the screw is
threaded into the support.
2. Place the assembled fan into the bracket and make the wiring connection
3. Place the canopy over the bracket, align the canopy holes with the screws and tighten.
ELECTRICAL CONNECTIONS
Functions Transmitter
When you would like to operate ceiling fan by remote controller, you should the
transmitter pointing to I. R. Sensor
OFF: Turn off ceiling fan.
HI: Turn on ceiling fan at high speed.
MED: Turn on ceiling fan at medium speed.
LOW: Turn on ceiling fan at low speed.
LIGHT: ON/OFF-Press and release immediately to turn on or off the light
1H: Setting up that the ceiling fan will off power after 1 hours automatically
2H: Setting up that the ceiling fan will off power after 2 hours automatically
Publicidad
