Descargar Imprimir esta página

Twin-Star International ClassicFlame 23II042FGL Instrucciones De Montaje página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

REPLACEMENT PARTS
Part
Part Name
1
Remote Control
2
Front Flame Circuit Board
3
Front Flame Generator Drive Motor
4
Logset Assembly
5
Back Flame Circuit Board
6
Back Flame Generator Drive Motor
7
DC-Jack
8
Thermostat Sensor
Blower/ Heater assembly
9
Main Circuit Board
10
11
Control Panel Circuit Board
12
Front Panel with Frame
Note, the scale and size of your parts may be different depending on your exact model.
CARE AND MAINTENANCE
• The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no
further lubrication. However, we recommend periodic cleaning/vacuuming of the fan/heater.
• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products
can be obtained at supermarkets or hardware stores.
• Make sure the unit is turned OFF and unplugged before cleaning the heater or fireplace.
A6051
8
www.tsicustomerservice.com

Publicidad

loading