RECORDING
1. Insert a micro SD or USB memory (Only for BAF-1220BT) into corresponding port.
2. Connect a microphone.
3. Turn on the speakerbox.
4. Press the REC / REPLAY button for a few seconds on the module or once REPLAY on
the remote control to start recording. The display will show the legend rEC. Press again
to stop recording.
To play the recording press REC/REPLAY in the playback module or REPLAY in the
remote control.
The recording only save that the microphone register.
Priority microphone
Press MIC.PRI in the playback module to give priority to microphone volume and
dercrease the music volume.
Press MIC.PRI again to deactivate this function.
33
Replace the battery of the remote control
Insert a battery CR2025 with the polarity as shown below.