Publicidad
Idiomas disponibles
Idiomas disponibles
RISK CATEGORY INDEX
This monitor comes equipped with a Risk Category Index
that automatically compares each reading to defined levels
established by the U.S. National Institutes of Health's (NIH)
National Heart Lung and Blood Institute as described earlier
in this manual, and provides a helpful cue if your reading falls
into one of the stages that could potentially indicate increased
risk. No cue is given if the reading falls in the normal range as
defined by NIH. Please note that cues provided by this monitor
are only intended to assist you in using this table. The table and
cues are only provided for convenience to help you understand
your non-invasive blood pressure reading as it relates to the NIH
information. They are not a substitute for a medical examination
by your physician. It is important for you to consult with your
physician regularly. Your physician will tell you your normal
blood pressure range as well as the point at which you may
actually be considered to be at risk.
(No Symbol)
20
RECALLING VALUES FROM MEMORY
You can store up to 99 measurements.
1. Press the MEM button to access the memory.
START
STOP
2. The monitor will first display the calculated average applied
to the last 3 memories.
3. Every new press of the MEM button will recall a previous
reading. The latest reading will be recalled first.
CLEARING VALUES FROM MEMORY
Press and hold the DATE/TIME SET buttons (
same time while in memory recall mode, and the data will be
erased automatically.
and
MEM
) at the
21
Publicidad
