Front Runner FAFT002 Instrucciones De Montaje página 3

2
FIT AND SECURE
2.1
1
2.2
2.3
FAFT002_REV_A00
3
4
4mm
2
10mm
5
6
5mm
3
Assemble the front (Item 1) & rear
(Item 2) foot rails using M6x16 button heads
(Item 3), splice plates (Item 4) & M6 nyloc nuts
(Item 5). Fully Tighten.
Place M6 nut caps (Item 6) over all nyloc nuts.
Remove all Screw Caps & Rubber Washers.
Store plastic screw caps & rubber
washers in a safe place for future use.
Place & align the spacers (Item 11) over the
holes as shown.
Place silicone sealant over the holes.
© 2021 FRONT RUNNER VEHICLE OUTFITTERS