Publicidad
Idiomas disponibles
Idiomas disponibles
Sensor installation
(Optional C7189R2002 or C7189R3002
wireless sensor sold separate. Up to 20 sensors
max per thermostat)
1. Remove white cover from grey base and
Insert (2) AAA Alkaline batteries in the
sensor.
2. Open the menu.
3. Tap "Devices & Sensors."
4. Tap "Add."
5. Follow the on-screen instructions.
6. Snap the sensor onto the wall-plate.
7. Adhere the included command strip to the
wall-plate. Then adhere the sensor to the
wall. Level sensor for appearance. (See the
sensor instructions for proper placement.)
EIM Installation
The T10+ can be connected wirelessly to an EIM and wireless outdoor sensor. The
thermostat will ask whether or not you are using an EIM during initial setup and
walk you through that process. EIM specific instructions are included with the
THM04R3000 EIM.
Wireless outdoor sensor Installation
The T10+ can be connected wirelessly to a C7089R3013 wireless outdoor sensor.
The thermostat will ask if you want to add a device during initial setup or you can add
the outdoor sensor later using the steps above.
WALL
WALLPLATE
ADHESIVE
STRIP
9
Devices
& Sensors
SENSOR
M38803
Add
M38790
M38804
M38805
Publicidad
