Publicidad
Idiomas disponibles
Idiomas disponibles
MagicSpeed Accessory
7.2
Connecting the control panel
➤ Plug the connection cable of the control panel (fig. 7 1, page 5) into the
sockets of the 8 pin plug housing (fig. 7 2, page 5).
Make sure that the colours on the connection cable match those on the
mating connector.
➤ Connect the slotted pieces (fig. 7 3, page 5) to slots 1 and 5 of the 8 pin
compact plug.
➤ Feed the connection cable for the control panel to the electronic module.
➤ Plug the control panel's plug housing into the electronic module's 8 pin
socket (fig. 8, page 5).
8
Programming MagicSpeed
Before you can use MagicSpeed you have to programme the system
according to which vehicle you have.
To start the programming, proceed as follows:
➤ Switch on the ignition.
➤ Press the ON/OFF button.
✓ The LED on the control panel lights up.
Programming MagicSpeed
31
Publicidad
