Descargar Imprimir esta página

Perel BG90003 Manual Del Usuario página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
Use the emergency mode when opening the safe for the first time, when your codes have been lost or when the
battery level is too low.
1. Open the battery compartment, insert the override key and turn to the left.
2. At the same time, turn the knob to the right.
6.2
Installing the Batteries
Do not puncture batteries or throw them in fire as they may explode. Do not
attempt to recharge non-rechargeable batteries (alkaline). Dispose of batteries in
accordance with local regulations. Keep batteries away from children.
Change the batteries as soon as the red LED lights.
1. Open the battery compartment and install the batteries according to the indicated polarity. It is
recommended to use alkaline batteries only.
2. Close the battery compartment.
Remark
Removing the batteries will delete the code. Re-enter your personal code. Refer to 5.3 Setting the Code.
6.3
Setting/Changing the Personal Code
1. With the safe door open, press the [START]. The LCD will display [------].
2. Enter a six-digit personal code and press the red button on the inside of the door. The beep means that
your code has been validated.
3. Proceed with programming the manager code.
6.4
Setting/Changing the Manager Code
1. With the safe door open, press the red button again on the inside of the door. The LCD will display [------].
2. Press [START] and enter a six-digit manager code. The beep means that your code has been validated.
6.5
Error Indication
If the code has been erroneously entered, the LCD will display [ERROR] and the safe will beep. The system will
be locked and beep for 2 minutes after 5 erroneous code inputs.
6.6
Low Battery Indication
Press [START] or the red button to consult the battery level. Change the batteries when the LCD displays [LO-BAT].
7.
Cleaning and Maintenance
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or
strong detergents.
8.
Technical Specifications
dimensions .............................................................................................. 350 x 330 x 500 mm
internal dimensions .................................................................................. 346 x 270 x 496 mm
body steel thickness
body ................................................................................................................... 2 mm
door .................................................................................................................... 4 mm
weight ....................................................................................................................... 18.5 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.perel.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 02 – 18/05/2017
BG90003
WARNING!
4
©Velleman nv

Publicidad

loading