Publicidad
Idiomas disponibles
Idiomas disponibles
Observe all local plumbing codes.
„
Make sure the water supply is shut off.
„
Read these instructions carefully to ensure proper installation.
„
TOTO reserves the right to update product design without notice.
„
Gasket / Sieve
Showerhead
Assembly
NO TE: Thoroughly clean and remove debris from the water supply pipe
before installation to prevent clogging the spray outlet.
NOTE: Do NOT twist showerhead to install shower arm.
•
Slide escutcheon onto the shower arm.
•
Wrap the shower arm threads with pipe tape. Screw the shower arm into
the supply elbow.
•
Ensure the gasket/sieve is in the pivot ball before installation.
•
Thread the showerhead onto the shower arm by hand.
•
Use an adjustable wrench to tighten the showerhead to the shower arm
firmly enough to seat the gasket and prevent leaking.
BEFORE INSTALLATION
INSTALLATION PROCEDURE
Finished wall
Escutcheon
Shower Arm
Pipe Tape
4
Publicidad
