Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Control Panel Features
Note: The following control panels
purchased may be slightly different according to the models. Your machine may not contain some indicators or
buttons. The actual shape shall prevail.
Indicator
Function
Continuous dehumidifying mode light
Bucket full indicator light;
Power light
Auto defrost indicator light
Note about Auto defrost indicator light :
· When auto defrost is operation on, the indicator humidity level;
· The indicator light flashes at 5Hz under room temperature sensor error or evaporator temperature sensor
error;
· If the auto defrost indicator light flashes, unplug the unit and plug it back in. If error repeats, call for service.
Power /
button
Press to turn the dehumidifier on and off.
Note: The power light illuminates when the unit is
switched on and turns dark when the unit is switched off.
When Humidity/Temperature sensor malfunction occurs,
the power light blinks at 5 times per second(on some
models).
are for explanation purpose only. The control panel of the unit you
Indicator
V.1
Function
Continuous operation on indicator light
40% humidity level setted mode operation on
indicator light
50% humidity level setted mode operation on
indicator light
60% humidity level setted mode operation on
indicator light
Continue(CONT.) button(On some models)
Select for the dehumidifier to operate continuously
for maximum dehumidification until the bucket is
full. The Humdity set control pads cannot be used
when Continuous operation is on. Press this pad
again to cancel Continuous operation and enter
dehumidifying mode.
Page 13
Publicidad
