Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
•
Do not use this appliance with a damaged cord or plug or when the
appliance has malfunctions, or has been damaged in any manner. To
avoid a hazard make sure that a damaged cord or plug will be replaced
by an authorized technician(*). Do not repair this appliances by yourself.
•
Do not use this appliance near direct heat sources.
•
Unplug the appliance from the socket when you are not using it.
•
Note: To avoid danger by accidental resetting the thermal protection,
this appliances may not be powered through an external switching
device, such as a timer, or connected to a circuit that regularly will be
switched on or off.
•
Using an extension cord or something similar is not allowed.
•
Make sure that the cord is not hanging over the edge of the table
or counter, does not touch any hot surfaces or is coming directly
into contact with the hot parts of the appliances. Don not place the
appliance underneath or close to curtains, window coverings etc
•
Make sure the cord does not touch the hot parts of the appliance.
•
We advise to place a heat resistant coating between your table and the
appliance (this way you don't get burns on your table or table cloth).
•
Do not use this appliances in the bathroom or near a sink filled with
water. If this appliances has fallen into the water do not under no
circumstances directly grab this appliances but first pull the plug from
the socket.
•
Children should be supervised to ensure that they do not play with the
appliance.
surface may get hot during use.
* Competent qualified electrician: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this electrician.
4
PaRTS DeSCRIPTIoN
1. Thermostat
2. Pilot light
3. Hot plate
2
BeFoRe The FIRST uSe
•
Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
•
Clean the plate with a damp cloth.
•
Connect the power cable to the socket. (Note: Make sure the voltage
which is indicated on the device matches the local voltage before
connecting the device. Voltage 220V-240V 50Hz)
•
The heating plate is provided with a protective layer which for the
first use should be removed. Switch the device and select the highest
setting for 10 minutes. There may be created some smoke by the
protection which now lit the heating plate. Then you can switch off the
cooker or use it.
3
1
Publicidad
