Audiolab DSP-4800W Manual De Usuario página 15

SYSTEM PARAMETER SETTING:
All the setted parameter can be saved in the memo-
rizer to be used in the same mode in the future. Short
press <"MENU"> into function selecting: Press "BACK",
"NEXT" or turn any knob of "PARA" to go forward or
back. Short press "ENTER" into relevant function par-
aemter setting. Turn any knob of "PARA" to set relevant
parameter; short "ENTER" to confirm, and "ESC" key to
escape.
Main Menu:
1. Xover SubMenu:
2. Program copy:
3. Channel Copy:
4. Input SubMenu:
5. Security SubMenu:
6. System SubMenu:
backlight for long display or auto close for 25 seconds.
1. Load Program
2. Store Program
3. Erase Program
Turn any knob of "PARA" to se-
lect Program Copy.
Turn any knob of "PARA" to se-
lect each Channel Copy.
Turn any knob of "PARA" to se-
lect Input Source of Input
Channel A-d.
Turn any knob of "PARA" to set
password.
1. Backlight Setup: Set the LCD
2. System Info: Press "ENTER"
to check System Info.
3. Temperature: Turn any knob
of "PARA" to set temperature.
4. Filter Dispay: Turn any knob
of "PARA" to select BW/Q.
5. Scene Change: Hotkey Ena-
ble/Disable
6. Scene Key Setup
7. Wifi Factory Reset: Turn
any knob of "PARA" to select
YES/NO.
P. 15
DSP-4800W
ENGLISH VERSION