Audiolab DSP-4800W Manual De Usuario página 22

4. Single Processor Connection
Processor
1. Restore wifi module a Factory Setting in the Processor's
front panel.
a. Start-up the processor
b. After the screen show out the model and brand
of the processor, press the "MENU" key.
c. Twist to "System Submenu" with the knob, then
press the "ENTER" key.
d. Twist to "wifi Factory Reset" with the knob,
then press the "ENTER" key.
e. Twist to "YES" with the knob, then press ENTER.
f. The screen will show "Successfully", Success!
2. Set to gain the IP automatically with the network card.
a. Click on the local connection icon on the tabletop
at the bottom right Corner, then click "Properties".
b. Click the "Internet Protocol (TCP/IP), then click
"Properties" again.
P. 22
DSP-4800W
ENGLISH VERSION
(Wired)
Computer
c. Click "Obtain an IP address automatically", OK.