ONE-Tools VL108 Manual Del Usuario página 7

Switching On-Off
Connect the device to the mains and switch on. Select one of the two settings:
position I: 50 °C
o
position II: 600 °C
o
Leave the device to warm up for at least 45 seconds.
Hold the device at an angle of 45° away from the user.
To eliminate weeds, gently waft the nozzle approximately 5 seconds over the
weed. Do not burn the plant completely, only the heat is needed. Keep the
nozzle at a distance of approximately 15 cm of the weed. Stronger weeds or
woody stems (wild grass, roots, etc.) may require a repeat application. If
necessary, repeat this procedure after a few days. Do not use this device on
flower beds or lawns.
Before switching off, switch to position I and let run for at least one minute.
Switch off the device and disconnect from the mains after use. Place on its stand
and leave to cool down completely.
Remarks
Dry woods, leaves, pine needles and dry grasses may catch fire. Watch the
treated plants for some time after treatment.
The best time to treat sprawl is in the spring. The results are not visible
immediately.
Older plants with hard leaves, such as thistles, dry earliest after repeated
treatment at intervals of one to two weeks. Some types of grasses are extremely
robust and require a longer exposure to heat.
The weed needs only be heated. Burning is not necessary. The cells of the leaves
dry out in this way and the weed dies.
Certain weed species require repeated treatment.
7. Cleaning and Maintenance
General
Before switching off the device, select setting I for at least one minute. It can be
switched off thereafter.
Disconnect the device from the power supply and allow to cool completely before
cleaning, maintenance or storage.
Clean the device and accessories before storing.
Wipe with a damp cloth to keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents.
Storing
Make sure the device has completely cooled down before storing.
Store the device, its accessories and this user manual in the original packaging.
Always store in a cool and dry place.
V. 05 – 18/08/2021
VL108
7 ©Velleman Group nv