Descargar Imprimir esta página
LG 43UF6800 Manual Del Usuario
LG 43UF6800 Manual Del Usuario

LG 43UF6800 Manual Del Usuario

Ocultar thumbs Ver también para 43UF6800:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OWNER'S MANUAL
Safety and Reference
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.
Please read this manual carefully before operating your TV and retain
it for future reference.
43UF6800
43UF6900
49UF6800
49UF6900
55UF6800
70UF7300
65UF6800
*MFL68741512*
40UF7700
60UF7700
43UF7700
65UF7700
49UF7700
70UF7700
55UF7700
79UF7700
58UF8300
49UF8500
55UF8500
60UF8500
65UF8500
P/NO : MFL68741512 (1507-REV04)
55UF9500
65UF9500
79UF9500
55UG8700
65UG8700
www.lg.com

Publicidad

loading

Resumen de contenidos para LG 43UF6800

  • Página 1 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 43UF6800 43UF6900 40UF7700 60UF7700 58UF8300 55UF9500 49UF6800 49UF6900...
  • Página 2 Important Safety Instructions Read these instructions. Keep these instructions. Always comply with the following precautions Heed all warnings. to avoid dangerous situations and ensure peak Follow all instructions. performance of your product. • Do not use this apparatus near water. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN...
  • Página 3 • Use only with a cart, stand, tripod, bracket, or • CAUTION concerning the Power Cord table specified by the manufacturer, or sold with (Can differ by country): the apparatus. When a cart is used, use caution Check the specification page of this owner’s when moving the cart/apparatus combination to manual to be certain.
  • Página 4 • Do not attempt to modify this product in any • Keep the product away from direct sunlight. way without written authorization from LG • Never touch this apparatus or antenna during a Electronics. Unauthorized modification could lightning storm.
  • Página 5 Viewing 3D Imaging • Generated Sound Cracking noise A cracking noise that occurs (For 3D models) when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common WARNING for products where thermal deformation is required.
  • Página 6 Cautions when using the 3D glasses *A 10 mm *B 18 mm • Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. • Do not use 3D glasses instead of your normal CAUTION glasses, sunglasses, or protective goggles.
  • Página 7 Glasses Glasses its type and size. AN-MR6** LG Audio • It is recommended to move the TV in the box or Magic Remote Device packing material that the TV originally came in. • Before moving or lifting the TV, disconnect the power cord and all cables.
  • Página 8 Adjusting the Menu CAUTION When the TV is turned on, press the joystick button • Avoid touching the screen at all times, as this one time. may result in damage to the screen. You can adjust the menu items moving the joystick •...
  • Página 9 • If you install the TV on a ceiling or slanted wall, be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall it may fall and result in severe injury. Use an mount is easy to adjust or to connect the cables.
  • Página 10 • When using the wall mounting bracket, apply • Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect the adhesive protective label to cover the unused stand openings. This will prevent the it directly to the USB port on the TV.
  • Página 11 Magic Remote Functions (Image shown may differ from your TV.) When the message Magic remote battery is low. Change the battery . is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover.
  • Página 12 How to Use Magic Remote GUIDE Displays the program event according to time scheduler. • Shake the Magic Remote slightly to the right and left or press (Screen Remote) Displays the Screen Remote. (Home), (INPUT), buttons * Accesses the Universal Control Menu in some regions. to make the pointer appear on the Used for viewing 3D video.
  • Página 13 • Storage Temperature are available for download. - 20 °C to 60 °C LG Electronics will also provide open source code • Storage Humidity to you on CD-ROM for a charge covering the cost Less than 85 %...
  • Página 14 Wireless Module (LGSBW51) Specifications (For 55/65UF9500) Wireless LAN Bluetooth IEEE 802.11a/b/g/n/ Bluetooth Standard Standard Version 4.0 2400 to 2483.5 MHz 2400 to Frequency Frequency 5150 to 5250 MHz 2483.5 range range 5725 to 5850 MHz 802.11a: 15 dBm 802.11b: 17 dBm 802.11g: 15 dBm Output Output...
  • Página 16 The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service. MODEL SERIAL...
  • Página 17 OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
  • Página 18 KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Página 19 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Página 20 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
  • Página 21 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Página 22 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Página 23 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Página 24 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
  • Página 25 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
  • Página 26 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
  • Página 27 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
  • Página 28 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...
  • Página 29 MANUAL DEL USUARIO Seguridad y Consultas TELEVISOR LED* * Los televisores con LED de LG tienen pantallas LCD con luces de fondo LED. Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. 43UF6800...
  • Página 30 INSTRUCCIONES DE Lea estas instrucciones. Conserve estas instrucciones. SEGURIDAD IMPORTANTES Preste atención a las advertencias. Siga todas las instrucciones. Siga siempre estas instrucciones para evitar situaciones peligrosas y garantizar el rendimiento máximo del producto. • No use el aparato cerca del agua. ADVERTENCI A /PRECAUCI Ó...
  • Página 31 • Use el producto únicamente en mesas portátiles, • PRECAUCIÓN con respecto al cable de pies, trípodes, soportes o mesas indicados por el alimentación (puede variar según el país): fabricante o provistos con el aparato. Al emplear Consulte la página de especificaciones en el una mesa portátil, tenga cuidado al moverla con manual del usuario.
  • Página 32 No lo instale en lugares • No intente modificar este producto de ninguna con demasiado polvo. manera sin autorización previa por escrito de LG • Si huele humo u otros olores que provienen Electronics. Cualquier tipo de modificación sin de la TV, desconecte el cable de alimentación...
  • Página 33 Ver imágenes en 3D • Reproducción de ruidos Crujidos Es posible que se produzcan crujidos (En televisores 3D) cuando esté mirando televisión o al apagar el televisor; se trata de un ruido generado por la contracción térmica del plástico debido a la ADVERTENCIA temperatura y la humedad.
  • Página 34 Use los anteojos 3D con precaución PRECAUCIÓN • Asegúrese de usar anteojos 3D LG. De lo • No use ningún producto no autorizado contrario, no podrá ver correctamente los videos para garantizar la seguridad y la vida útil del en 3D.
  • Página 35 AN-MR6** Dispositivo de el material de empaque en el que lo recibió al comprarlo. Remoto Mágico audio de LG • Antes de mover o levantar el televisor, desconecte el cable de alimentación y el resto de Mantenimiento los cables. Limpieza del televisor •...
  • Página 36 Ajustar el Menú PRECAUCIÓN Cuando la TV está encendida, presione el botón de • No toque la pantalla. De lo contrario, podría control una vez. dañarla. Puede ajustar los elementos del menú moviendo • No coloque el producto en el piso con la parte el botón de control hacia arriba, abajo, izquierda o frontal hacia abajo sin una almohadilla.
  • Página 37 ésta en orden detalladas. Recomendamos que use un soporte de inverso. pared de marca LG. El soporte de pared LG hace • Si instala el televisor en el techo o en una pared que sea fácil ajustar o conectar los cables. Cuando inclinada, podría caerse y provocar lesiones...
  • Página 38 • Cuando use el soporte de pared, coloque la • Según la tarjeta gráfica, es posible que algunos etiqueta adhesiva protectora para cubrir las ajustes de resolución no permitan que la imagen se aberturas del soporte no utilizadas. Esto ayudará ubique en la pantalla de forma correcta.
  • Página 39 • Si el dispositivo conectado al puerto Terminal de entrada también es compatible con el formato ULTRA HD Deep Color, la imagen puede ser más clara. Sin embargo, si el dispositivo no lo admite, puede no funcionar correctamente. En este caso, conecte el dispositivo a un puerto HDMI diferente o cambie la configuración HDMI ULTRA HD Deep Color del TV a Apagado.
  • Página 40 Como usar el Control Remoto Mágico GUIDE Muestra el evento de programa según la hora programada. • Agite suavemente el Control Remoto Mágico hacia la derecha y a la (Control remoto de pantalla) Muestra el control remoto de pantalla. izquierda o presione los botones (Home), (ENTRADA), * Accede al menú...
  • Página 41 0 °C a 40 °C garantía y los avisos de derechos de autor. • Humedad de funcionamiento LG Electronics también le proporcionará el código Menos de 80 % fuente abierto en un CD-ROM con un cargo que • Temperatura de almacenamiento cubra el costo de realizar tal distribución (como...
  • Página 42 Módulo inalámbrico LG (LGSBW51) Especificación (Para 55/65UF9500) Inalámbrico LAN Bluetooth Versión IEEE 802.11a/b/g/n/ Estándar Estándar Bluetooth 2 400 a 2 483,5 MHz 2 400 a Rango de Rango de 5 150 a 5 250 MHz 2 483,5 frecuencias frecuencias 5 725 a 5 850 MHz 802.11a: 15 dBm...
  • Página 44 Los números de modelo y de serie del televisor se encuentran ubicados en la parte posterior del aparato. Regístrelos en el siguiente espacio por si alguna vez necesita recurrir al servicio técnico. MODELO SERIE...
  • Página 45 MANUAL DEL USUARIO CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Lea atentamente este manual antes de poner en funcionamiento el equipo y consérvelo para futuras consultas. www.lg.com...
  • Página 46 CÓDIGOS DE TECLA CÓDIGOS DE TECLA • Esta función no está disponible en todos los modelos. Código Código Función Nota Función Nota (Hexa) (Hexa) CH +, PR + Botón RC Lista Botón RC CH -, PR - Botón RC Salir Botón RC Volumen + Botón RC...
  • Página 47 (TV) (PC) • LGTV admite el uso de un USB a convertidor de serie basado en chip PL2303 (ID de proveedor: 0x0557, RS-232C IN ID de producto: 0x2008) que LG no fabrica ni incluye. (CONTROL & SERVICE) (PC) (TV) •...
  • Página 48 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS (TV) (PC) (TV) (PC) Tipo de adaptador telefónico RS-232C IN RS-232C IN • Para realizar la conexión entre la PC y la TV, que se especifica en el manual, debe comprar el cable de (CONTROL &...
  • Página 49 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Parámetros de comunicación • Velocidad en baudios : 9600 bps (UART) • Bit de parada: 1 bit • Longitud de datos: 8 bits • Código de comunicación: código ASCII • Paridad: Ninguna • Use un cable cruzado (reversa). Lista de referencia de comandos (según el modelo) Datos...
  • Página 50 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Protocolo de Transmisión/Recepción Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : Primer comando para controlar la TV. (j, k, m o x) [Command 2] : Segundo comando para controlar la TV. [Set ID] : Puede ajustar [Set ID] para elegir el número de ID del monitor que desea en el menú de opciones.
  • Página 51 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS * Según el modelo y la señal, los comandos podrán funcionar de un modo diferente. 01. Potencia (Command: k a) (imagen apagada) 10: Silenciador de video encendido ► Para controlar el encendido o apagado del dispositivo.
  • Página 52 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Datos Mín. : 00 a Máx.: 64 Ack [r][ ][Set ID][ ][OK/NG][Data][x] Ack [i][ ][Set ID][ ][OK/NG][Data][x] * (según el modelo ) 09. Tinte (Command: k j) 14. Graves (Command: k s) ► Para ajustar el tinte de la pantalla. ►...
  • Página 53 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS * Ejemplos de comandos de sintonización: 4er. Banda 19 (decimal) 1. Sintonizar el canal Antena analógico (PAL) 10. Set ID = Todo = 00 5er. Banda 20 (decimal) Datos 00 & 01 = Datos de canal es 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Datos 02 = TV Antena analógica = 00 Resultado = ma 00 00 0a 00...
  • Página 54 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS - 22: TV Antena (DTV): no usar número de Total = ma 00 00 00 11 00 01 02 canal físico - 26: Cable de TV (CADTV): no usar un número 2. Sintonizar el canal BC (ISDB-BS) 30. de canal físico Set ID = Todo = 00 - 46: Cable de TV (CADTV): usar solo un...
  • Página 55 11 11 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS [Data 00] [Data 01] [Data 02] [Data 03] 24. Input select (Selección de entrada) (Command: x b) (Entrada de la imagen principal) ► Para seleccionar la fuente de entrada para la imagen principal. X: no importa Transmission [x][b][ ][Set ID][ ][Data][Cr] Ack [t][ ][Set ID][ ][OK][Data00][Data01]...
  • Página 56 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS 27. Configuración automática (Comando: j u) ► Para ajustar la ubicación de la imagen y reducir su temblor de manera automática. La configuración automática solo funciona en el modo RGB-PC. Transmission [j][u][ ][Set ID][ ][Data][Cr] Dato 01: Ejecutar Configuração automática Ack [u][ ][Set ID][ ][OK/NG][Data][x]...
  • Página 57 65UG8700 Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. 55UG870T 65UG870T (55UG8700, 55UG870T) (M4 X L8) (M4 X L20) ENGLISH Depending upon model ESPAÑOL Según el modelo www.lg.com P/No : MFL68684972 (1503-REV00)
  • Página 58 Read Safety and Reference. ENGLISH Leer Seguridad y Consultas. ESPAÑOL...
  • Página 60 Image shown may differ from your TV. ENGLISH La imagen puede ser diferente a la de su televisor. ESPAÑOL...
  • Página 61 VIDEO AUDIO VIDEO MONO...
  • Página 63 Thickness Depth ENGLISH 55UG8700 65UG8700 (55UG8700-SA) (65UG8700-SA) MODELS 55UG870T 65UG870T (55UG870T-DA) (65UG870T-DA) With stand (mm) 1,241 x 773 x 236 1,461 x 897 x 255 Dimensions (W x H x T) (D) Without stand (mm) 1,241 x 723 x 60 (98) 1,461 x 846 x 60 (99.9) With stand (kg) 24.2...