Installation
1
Mounting the hardware
Thread the fixture mounting screws (EE) into the provided
holes of the mounting bracket (FF).
Thread the hex nuts (BB) onto the fixture mounting screws
(EE). Do not tighten the hex nuts (BB) at this time.
Pull the supply wires out from the outlet box and mount the
mounting bracket (FF) to the outlet box using the bracket
mounting screws (DD).
Place the back plate of the fixture body (A) over the outlet
box and onto the fixture mounting screws (EE).
Adjust the fixture mounting screws (EE) until they protrude
out from the back plate 1/4 in.
Remove the fixture body (A) and secure the position of the
fixture mounting screws (EE) by tightening the hex nuts (BB)
against the mounting bracket (FF).
2
Connecting the wires
NOTE: If you have electrical questions consult your
local electrical code for approved grounding methods.
Connect the black supply wire to the black fixture wire
using a wire nut (CC).
Connect the white supply wire to the white fixture wire
using a wire nut (CC).
Connect the fixture ground wire to the supply ground wire
using a wire nut (CC).
Wrap all wire connections with electrical tape for a more
secure connection.
DD
EE
BB
A
5
Please contact 1-855-HD-HAMPTON for further assistance.
FF
FF
CC
HOMEDEPOT.CA