Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
3
Mounting the fixture
Place the back plate of the fixture body (A) onto the fixture
mounting screws (EE) and secure it into place by using the
lock nuts (AA) provided.
Caulk the upper 2/3rds of the back plate on the fixture
body (A).
Leave the bottom 1/3rd un-caulked for drainage of any
water that may leak into the enclosure.
Operation
Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
Care and Cleaning
EXTERIOR MAINTENANCE
•
Use a dry or slightly dampened clean cloth and wipe the
surface of the fixture.
INTERIOR MAINTENANCE
•
Disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box.
•
Use a dry or slightly dampened clean cloth to wipe the interior
surface of the fixture.
AA
EE
NOTE: Do not use any cleaners with chemicals,
solvents, or harsh abrasives. Use only a dry soft cloth
to dust or wipe carefully.
6
A
Publicidad
