Publicidad
Idiomas disponibles
Idiomas disponibles
2610052965_GDS18V-221 5/24/19 1:37 PM Page 10
any assembly, adjustments or changing
accessories. Such preventive safety
measures reduce the risk of starting the
tool accidentally.
▶ Inserting and Releasing Battery
Pack
Set Forward/Reversing lever 3 to the
center (locked position). Slide charged
battery pack 10 into the housing until the
battery pack locks into position (Fig. 2).
Your tool is equipped with a secondary
locking latch to prevent the battery pack
from completely falling out of the handle,
should it become loose due to vibration.
To remove the battery pack, press the
battery pack release button 9 and slide the
battery pack 10 completely out of tool
housing (Fig. 3).
▶ Inserting and Removing
Accessories
Attach only high quality impact ready
accessories with the proper size square
drive designed for use with impact
wrenches. To install a socket 15, simply
push completely onto output drive 1 (Fig.
4).
▼ BELT CLIP (Optional Accessory)
position yourself to avoid entanglement
with surrounding objects. Unexpected
entanglement could cause the tool to fall
resulting in injury to the operator or
bystanders.
The optional belt clip accessory will allow
you to conveniently attach your tool to your
belt. This feature will allow you to have
both hands free when climbing a ladder or
moving to another work area.
The belt clip 12 can be attached to either
side of the tool by securing it with a
mounting screw. Always make sure you
securely tighten the mounting screw before
use (Fig.1).
To use clip, turn tool upside down and
attach to your belt.
Assembly
Disconnect battery pack
from tool before making
When
the
tool
attached to the belt,
Fig. 2
10
Fig. 4
1
is
10
Fig. 3
9
10
15
Publicidad
