Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
7
Caulking around the light
fixture
□
Caulk around the 1-2- asy Connect™ (D) and
mounting surface with silicone sealant (not
included).
Operation
1
Adjusting the lamp heads
WARNING: Risk of fire. Keep the lamp heads at least
2 in. (51 mm) from combustible materials.
CAUTION: Keep lamp heads 30° below horizontal to
avoid water damage and electrical shock.
□
Turn the power on at the circuit breaker or fuse
and turn on the wall switch.
□
If needed, gently grasp the lamp heads (A) and
tilt them up or down or side to side to adjust
the light coverage area.
A
D
2
Rotating the sensor controls
downward
CAUTION: To avoid water damage and risk of electrical
shock, the motion sensor controls must be facing the
ground when installation is complete.
□
Rotate the motion sensor (C) so the controls
face toward the ground.
C
7
Please contact 1-866-308-3976 for further assistance.
HOMEDEPOT.COM
Publicidad
