Descargar Imprimir esta página

Greencut HEC107 Manual De Instrucciones página 29

Ocultar thumbs Ver también para HEC107:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

DRAWER SLIDES
If it becomes necessary to remove drawers, follow these drawer removal instructions:
1.
Pull drawer all the way out, then push back a fraction of an inch.
2.
Insert a screwdriver into slot in the slide and push in on the stop until it clears the lance. Repeat the
precedure on the other slide amd remove drawer.
3.
To re-install drawer, pry stop far enough out to engage lances (3/16" to 1/4") and push drawer onto slide
until stops engage lances..
ATTENTION
Lubricate the top and the bottom channels of the drawer slides at least twice a year.
Do not open more than one loaded drawer at a time.
The maximum loading capacity is 70 Kg.
29
EN

Publicidad

loading