Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
The beverage
cooler does not
cool.
The beverage
cooler is not cold
enough.
The beverage
cooler seems to
make too much
noise.
An interior red
light is flashing.
Possible Causes
The unit may be plugged
in using a different
voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
The external environment
may require a higher
setting.
The cooler may be placed
too close to a heat
source.
There is insufficient
ventilation.
The door is not
completely closed or the
door seal is not working
properly.
The unit is not leveled.
There is insufficient
ventilation. The unit is
too close to a wall or
another surface.
The set temperature is
too low.
Solution
Check if using the wrong
voltage.
Reset the circuit breaker
or check for a broken fuse.
Lower the temperature of
the cooler.
Keep the cooler away from
direct sunlight or other
heat sources.
Place the beverage cooler
in an area with proper
ventilation and clearances.
Close the door tightly. Do
not open the door
frequently and do not
keep the door open for
extended periods of time.
Replace the seal on the
door if necessary.
Adjust the unit's feet and
ensure the product is
level.
Allow sufficient clearance
around the unit.
Adjust the set
temperature so that it is
higher than the beverage
cooler's interior
temperature.
EN
12
Publicidad
